Home > Dual Wall RC Drill Pipe >

dia 101.6mm 6M 4 Inch Metzke Thread Dual Wall RC Drill Pipe

Product Categories

DTH Drilling Tools [69]
Down The Hole Hammer [167]
DTH Drill Bits [166]
DTH Drill Pipe [58]
Reverse Circulation Hammer [134]
RC Drill Bit [129]
Dual Wall RC Drill Pipe [20]
Symmetrix Overburden Drilling System [7]
ODEX Drilling System [28]
Drag Drill Bit [50]
Top Hammer Drilling Tools [64]
Tapered Button Bits [12]
Diamond Core Drilling Tools [12]
Button Bit Grinder [12]
Tricone Drill Bit [18]

Changsha Sollroc Engineering Equipments Co., Ltd

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

dia 101.6mm 6M 4 Inch Metzke Thread Dual Wall RC Drill Pipe

Ask Lasest Price
Brand Name :	SOLLROC
Model Number :	101.6mm
Certification :	SGS
Price :	negotiate
Payment Terms :	L/C, D/A, D/P, T/T, , MoneyGram
Supply Ability :	5000pcs per month
Delivery Time :	22-25 days

Add to Cart

Product Details
Company Profile

dia 101.6mm 6M 4 Inch Metzke Thread Dual Wall RC Drill Pipe

6m 4" Inch RC Rods Metzki Box And Pin Thread With Inner Tubes For Reverse Circulation Drilling

Product Introduce:

RC, or reverse circulation, drilling is a tried and true drilling method in certain circumstances. Drillers usually use it on large-diameter holes because it is faster and easier to clean the hole. The fluid and cuttings flow up the drill pipe and down the annulus. In softer formations, this causes less washout and makes sampling faster and more accurate because cuttings are not contaminated by sloughing formation off the hole walls. They also come up the drill pipe very fast, giving an accurate formation log.

Adavantages:

1.High tensile hardened tool joints

2.Seamless High tensile drill pipe and inner tube materia

3.Inner tubes slide into place and seal with double o-rings as the threaded outer tubes are torqued together.

4.Abrasion-resistant alloy steel inner and outer tubes extend life of the drill pipe

Specification:

4''-101.6mm RC dual wall drill rod

SOLLROC Dual Wall RC Drill rod specification:

Pipe OD

Outer Tube

Inner Tube

Thread

Spanner Flat

Weight
(6M)

outer diameter

inner diameter

wall thickness

outer diameter

inner diameter

wall thickness

4''

101.6 mm

94.6 mm

7.1 mm

50.8 mm

45.3 mm

5.5 mm

4'' Remet /

4'' Metzke /

4'' Matrix

90 mm

155 kgs

SOLLROC Dual Wall RC Drill rod specification:

Pipe OD	Outer Tube			Inner Tube			Thread	Spanner Flat	Weight
Pipe OD	outer diameter	inner diameter	wall thickness	outer diameter	inner diameter	wall thickness	Thread	Spanner Flat	3M	6M
3 1/2''	88.9 mm	81.8 mm	5.3 mm	38.1 mm	32.6 mm	5.5 mm	3 1/2'' Remet	90 mm	77 kgs	125 kgs
4''	101.6 mm	94.6 mm	7.1 mm	50.8 mm	45.3 mm	5.5 mm	4'' Remet	90 mm	77 kgs	155 kgs
4''	101.6 mm	94.6 mm	7.1 mm	50.8 mm	45.3 mm	5.5 mm	4'' Metzke	90 mm	77 kgs	155 kgs
4''	101.6 mm	94.6 mm	7.1 mm	50.8 mm	45.3 mm	5.5 mm	4'' Matrix	90 mm	77 kgs	155 kgs
4 1/2''	114.3 mm	107.2 mm	7.1 mm	63.5 mm	58 mm	5.5 mm	4 1/2''Remet	90 mm	97 kgs	172 kgs
4 1/2''	114.3 mm	107.2 mm	7.1 mm	63.5 mm	58 mm	5.5 mm	4 1/2''Metzke	90 mm	97 kgs	172 kgs
4 1/2''	114.3 mm	107.2 mm	7.1 mm	63.5 mm	58 mm	5.5 mm	4 1/2''Matrix	90 mm	97 kgs	172 kgs

Working Principle:

Reverse circulation is achieved by blowing air down the annulus of the rod, the differential pressure creating air lift of the water and cuttings up the inner tube which is inside each rod. It reaches the deflector box at the top of the drill string then moves through a sample hose which is attached to the top of the cyclone.

The drill cuttings travel around the inside of the cyclone until they fall through an opening at the bottom and are collected in a sample bag. For any drill hole there will be a large number of sample bags, each one marked to record the location and drilling depth that the sample was obtained.

The collected series of sample bag cuttings are later taken for analysis to determine the mineral composition of the drill hole. The analysis results of each individual bag represents the mineral composition at a particular sample point in the drill hole. Geologists can then survey the drilled ground analysis and make decisions about the value of the overall mineral deposit.

Detailed Photo:

About us:

SOLLROC Reverse Circulation drilling (RC) ,from size 3’’ to 5.5’’, is a technique of drilling that uses dual wall drill rods that consist of an outer drill rod with an inner tube. By using compressed air to extract rock fragments sample,the samples travel through rods to a sample splitter at surface, avoiding all contact between the samples and the borehole wall that allows samples to be retrieved with minimal contamination,which is mainly used in deep hole exploration and mining grade control.

Delivery Way:

By Air, By express or By Sea

Quality warranty:
Our products are made of high quality steel and all spares parts are inspected strictly before shipping. We have quickly responses for your complaint and suggestion.

Package:
Using ply-wooden cases and pallet for package to protect the products and avoid the damagement during transportation. Also we can customize package according to your special requests.

Product Tags:


*From:	Your email address is incorrect!
*To:	Changsha Sollroc Engineering Equipments Co., Ltd
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!