Home > RC Drill Bit >

Gold Mine Sampling SRC531 3 3/4'' 95mm RC Drill Bits

Product Categories

DTH Drilling Tools [69]
Down The Hole Hammer [167]
DTH Drill Bits [166]
DTH Drill Pipe [58]
Reverse Circulation Hammer [134]
RC Drill Bit [129]
Dual Wall RC Drill Pipe [20]
Symmetrix Overburden Drilling System [7]
ODEX Drilling System [28]
Drag Drill Bit [50]
Top Hammer Drilling Tools [64]
Tapered Button Bits [12]
Diamond Core Drilling Tools [12]
Button Bit Grinder [12]
Tricone Drill Bit [18]

Changsha Sollroc Engineering Equipments Co., Ltd

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

Gold Mine Sampling SRC531 3 3/4'' 95mm RC Drill Bits

Ask Lasest Price
Brand Name :	SOLLROC
Model Number :	SRC531 RC bit
Certification :	SGS
Price :	negotiate
Payment Terms :	L/C, D/A, D/P, T/T, , MoneyGram
Supply Ability :	5000pcs per month
Delivery Time :	15-22 days

Add to Cart

Product Details
Company Profile

Gold Mine Sampling SRC531 3 3/4'' 95mm RC Drill Bits

Gold Mine Sampling Drilling SRC531 3 3/4'' 95mm RC Drill Bits

Product Introduce:

Reverse circulation hammers and bits are used in exploration and grade control applications to obtain an accurate sample with no risk of contamination. Sollroc offers a range of reverse circulation hammers and drill bits that provide outstanding performance coupled with reliability and simplicity.
The reverse circulation drilling method has the capability of reaching depths of 500 metres. A pneumatic hammer-like device is used to hammer into the earth to remove rock samples which are then pushed up into the mining machine using compressed air. The samples are collected in a sample bag which is located within the machine. More than one sample bag can be collected which allows for more of a variety of samples to be analysed. Sample bags are usually marked to show the location from which the sample was taken as well as the depth from which the samples are extracted.

Adavantages:

1. Direct drilling cost reductions in the range of 25% to 40%.

2. Faster completion of drill programs with quicker delivery of results.

3. Reduced man-hours at the drill with decreased exposure to potential accidents.

4. Reduced contractor activity in the mine reduces mine support burden.

5. Indirect cost reductions gained from a simplified sampling process.

6. Requires less water than diamond drilling.

Technical Parameters

RC bits Model SRC531

Diameter		No. x Button diameter mm		Button angle	Flushing holes	Shroud Dia mm	Weight (kg)	Part No.
mm	inch	Gauge Button	Front Button
95	3 3/4	8 x 12mm	6 x 12mm	35	2	93	6.3	SRC531-95

RC hammers

Hammer	Bit Shank	Hole Range (mm)	External Diameter (mm)	Length (less bit) mm	Weight (kg)	Connection Thread	Working Pressure
RC3-E531	RE531	84-100	81	1069	29	3" Remet	1.5-3.5Mpa
RC3.5-Y	RC3.5Y	98-115	94	1184	44	3" Remet	1.5-3.5Mpa
RC4-E004	RE004	111-127	107	1252	52	3.5" / 4" Remet 4" Metzke	1.5-3.5Mpa
RC4.5-E542	RE542	113-130	109.5	1191	57	3.5" / 4" Remet 4" Metzke	1.5-3.5Mpa
RC4.5-E543	RE543	120-135	116	1191	63	3.5" / 4" Remet 4" Metzke	1.5-3.5Mpa
RC4.5-E545	RE545	122-135	117.5	1261	65	4" / 4.5" Remet 4" / 4.5" Metzke	1.5-3.5Mpa
RC5-P40	PR40(RE040)	124-142	120.5	1362	80.5	3.5" / 4.5"Remet 3.5" / 4.5"Metzke	1.5-3.5Mpa
RC5.5-P52/P52R	PR52/PR52R	126-142	121	1227	68.5	4" / 4.5"Remet 4" / 4.5"Metzke	1.5-3.5Mpa
RC5.5-E547	RE547	130-146	124.5	1270	74	4.5" Remet 4.5" Metzke	1.5-3.5Mpa
RC5.5-P54/P54R	PR54(RE054)	135-150	130	1294	84.5	4.5"Remet 4.5"Metzke	1.5-3.5Mpa
RC5.5-M5456	MX5456	136-150	132	1362	90	4.5"Remet 4.5"Metzke	1.5-3.5Mpa

Working principle

The on-board compressor delivers power to a pneumatic reciprocating piston. The piston, in turn, drives a tungsten-steel drill bit which is purpose designed to be able to crush hard rock.

Similar to air core drilling, drill cuttings are returned to surface inside rods. We achieve this through the use of dual wall drill rods: an outer drill rod with an inner tube. When compressed air is blown through the rod, the volume displaces the air, lifting the samples to the surface.

Once cuttings reach a diverter at the top of the hole, they’re moved through a hose and around the cyclone, which slows the sample down. From the cyclone the sample goes over a splitter that delivers a percentage of the entire sample into a sample bag. The exploration drilling team then collect the samples aligned to the hole depth and lay them out for the client to log, and then transport to the lab for assay.

Detailed Photo:

About us:

SOLLROC Reverse Circulation drilling (RC) ,from size 3’’ to 5.5’’, is a technique of drilling that uses dual wall drill rods that consist of an outer drill rod with an inner tube. By using compressed air to extract rock fragments sample,the samples travel through rods to a sample splitter at surface, avoiding all contact between the samples and the borehole wall that allows samples to be retrieved with minimal contamination,which is mainly used in deep hole exploration and mining grade control.

Delivery Way:

By Air, By express or By Sea

Product Tags:


*From:	Your email address is incorrect!
*To:	Changsha Sollroc Engineering Equipments Co., Ltd
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!